Welcome to London's Audi Specialist.We have a team of Audi specialist who can sort out anything from basic Audi servicing to advanced technical Audi cars problems. One of the best Audi Master Technician on site offering knowledge and experience using the latest Audi Main Dealer compulsory diagnostics equipment.

With a state of charge (SoC) of about ten percent, just ten minutes at a fast-charging station with a maximum charging power of 270 kW is enough to replenish up to 255 kilometers (158 mi) of range under ideal conditions. An ability that is fundamentally enabled by the 800-volt architecture, the new preconditioned HV battery, and the new predictive thermal management in the PPE. The HV battery in the Audi Q6 e-tron series is made up of twelve modules and has a gross storage capacity of 100 kWh (net 94.9). After market launch, this version will be followed by another variant with ten battery modules and gross storage capacity of 83 kWh. A mere 21 minutes is enough to charge the high-voltage battery from 10 to 80 percent. High charging power over a longer period of time contributes significantly to the customer-friendly charging performance of the PPE-based models. The maximum DC charging capacity of the Audi Q6 e-tron1 in series production is 270 kW.

For charging stations working with 400-volt technology, bank charging is enabled. Corresponding high-voltage switches in the BMCe (battery management controller) are activated before the charging process begins. This divides the 800-volt battery into two batteries with equal voltage, which can then be charged in parallel with up to 135 kW. If necessary, both halves of the battery are first brought to the same state of charge and then charged in lockstep.

The charging management supports the international charging standard CSS (Combined Charging System). For fast and reliable charging, the HCP 5 high-performance computer manages the process within the new domain computer structure of the E3 1.2 electronic architecture. A communications control unit, referred to as the Smart Actuator Charging Interface Device (SACID), acts as an interface to establish a link between the vehicle and the charging station and transmits the incoming standardized information to the HCP 5 domain computer.

For the PPE models for the European market, Audi is planning DC and AC charging options via a CCS combo connector on the left rear of the vehicle. An additional AC charging connector will be installed on the opposite side of the vehicle. The Audi Q6 e-tron series charges with 11 kW alternating current as standard. This means that an empty battery is recharged overnight. AC charging with 22 kW will be offered as an option at a later date. The charging port caps can be conveniently opened electronically via the MMI display or on the cap itself with gentle pressure on its capacitive center. After the charging cable is removed, the charging port closes automatically.

“Plug & Charge” functionality is included as standard in the Q6 e-tron series. “Plug & Charge” is currently available at IONITY charging stations as well as those of other charging point operators, and will become available at more and more providers. Here it is only necessary to insert the charging cable following a one-time activation in the vehicle. Vehicle and charging station communicate via an encrypted connection. The charging process starts automatically, and billing is carried out via the means of payment saved in the myAudi App, such as a credit card.

Reliable charging infrastructure with Audi charging and Audi charging hubs

Audi customers with electric vehicles benefit from reliable charging infrastructure in the form of the Audi charging service, available since 2023, and the Audi charging hubs, quick-charging stations in urban environments that can be booked in advance. The Audi charging service offers straightforward access to a dense network of around 630,000 charging points in 29 countries within Europe. This includes about 3,000 high power charging (HPC) stations from IONITY, which allow for rapid charging with up to 350 kW of power, primarily along major traffic routes. Anyone who buys a new fully electric Audi will be able to charge economically from day one – for the first year, Audi will pay the subscription fee of 14.99 euros a month for the Pro plan. A complete overview of all the current plans is available at www.audi.de. The service contracts can be managed conveniently using the myAudi app.

The electrically powered car will be shown as an exterior model at the spring motor show in the Chinese capital; the series version will then make its public debut in the fourth quarter of 2024. Like other PPE models for the Chinese market, the Audi Q6L e-tron will be locally produced in a new factory in Changchun. The first deliveries to customers will take place in 2025.

The Audi Q6L e-tron is defined by impressive driving and charging performance, excellent efficiency, and an even greater range than the global model. The wheelbase, longer by 105 millimeters, also allows the installation of a larger battery. With it, CLTC ranges of more than 700 kilometers will be possible. The letter “L” in the name signals the long wheelbase, which is also becoming the hallmark of outstanding long-distance capability.

Audi has been building “L” models with an extended wheelbase for the Chinese market for decades. The A6L and A4L are the best-known large-volume versions, alongside the Q5L, A8L, and A8L Horch. Now, Audi is adding the L model to the Q6 e-tron family - providing even more space, comfort, and everyday usability. Together with the new interior design philosophy, the Q6L e-tron is creating a very exclusive and generous space for passengers in the market.

The Audi Q6L e-tron epitomizes Audi’s distinctive SUV design with consistently further developed e-tron-specific design language. The Audi Q6L e-tron differs from the global version, and this becomes apparent from the start. Above all, the redesigned front end, with an evolution of the Audi brand face, sets its own accents for the China-specific version.

To accentuate the progressive and unique exterior design of the Q6L e-tron, exclusive colors will be available for this China-specific version. Lilac Grey, shown on the exterior model at the auto show in Beijing, is one of them.

With the extended wheelbase and a correspondingly stretched, sweeping roofline, the side lines are particularly elegant and in perfect proportion. Pioneering technologies, not least in the lighting units, begin the next chapter in electromobility for the Four Rings and will continue to make “Vorsprung durch Technik” a daily experience in China.

The PPE, developed jointly with Porsche, and the E3 1.2 electronic architecture are important milestones in the expansion of Audi's global range of electrically powered models. They mark the start of a comprehensive strengthening and rejuvenation of the model portfolio.

“With the Q6L e-tron, we are bringing the technological benefits of our new Premium Platform Electric to China. The model underscores our promise to offer electric vehicles in all core segments by 2027,” said Gernot Döllner, Chairman of the Board of Management of AUDI AG, during the world premiere at the Beijing Auto Show.

Impressive range and charging performance

Powerful, compact, and highly efficient electric motors, and a newly developed lithium-ion battery consisting of 12 modules and 192 prismatic cells with a total gross capacity of 107 kWh (+7 kWh compared to the variant that will be available upon launch in the Q6 e-tron quattro1 and the SQ6 e-tron2 ensure a range of more than 700 kilometers according to CLTC.

Thanks to the 800-volt technology and a maximum DC charging capacity of 270 kW as standard, short charging stops are possible with the Audi Q6L e-tron. Up to 260 kilometers of range can be recharged in just ten minutes at an appropriate charging station (High Power Charging, HPC). The State of Charge (SoC) will increase from 10 to 80 percent within 25 minutes.

Intelligent thermal management makes an essential contribution to the high charging performance and long service life of the high-voltage battery in the Q6L e-tron.

The Q6L e-tron will be offered as a rear-wheel drive version with a system power output of 255 kW and a quattro all-wheel drive with 345 kW. The rear-wheel drive version offers significant efficiency and range, and the quattro version provides excellent traction and driving dynamics.

Elegance and evolution: the exterior

The Audi Q6L e-tron is positioned in the premium mid-size segment. With a vehicle length of 4,884 millimeters, a width of 1,965 millimeters, and a height of 1,687 millimeters, the SUV offers maximum space, comfort, and suitability for everyday use. The wheelbase of 2,995 millimeters allows business-class legroom in the rear seats.

Thanks to the Premium Platform Electric, the Audi Q6 e-tron model family has perfect proportions. The L-version surpasses the appearance of the other models with the remarkable elegance of its long wheelbase and stretched roofline. Combined with this elegance, its striking SUV look ensures an incomparably dynamic appearance. Organically shaped surfaces are structured by the precise lines of the body and create a characteristic interplay between light and shadow even when stationary.

The greenhouse stretches flat and taut over the powerful body. It is tapered towards the rear, and the gently sloping D-pillars flow elegantly into the characteristically shaped body shoulders. The opening of the D‑pillars towards the roof makes the vehicle more dynamic, making the cabin appear linger. A striking line running from the rear lights to the rear doors emphasizes the upper section of the “quattro blisters” - the contours of the body on which the cabin appears to rest. This sculptural emphasis on the wheel is a core element of Audi's design DNA. Audi calls this central design principle "making technology visible." The dynamic rear creates a mixture of sporty elegance and power. With its continuous light strip, this rear architecture gives the Q6L e-tron the clarity and authority typical of Audi.

The 21-inch wheels are aerodynamically optimized, visually reversing the classic surface distribution of slim spokes and flat air intakes. Here, the compact openings only slightly break up the flat design of the wheels because the disk brakes are rarely used and, therefore, require little cooling air.

The handles integrated almost flush into the door surfaces are also new and a first for Audi. A proximity sensor on the underside of the handles unlatches the lock when needed - the door springs open easily without any effort and only needs to be swung open manually.

The upright front is an evolutionary development of the e-tron brand face. As is typical for an electrically powered Audi, the central area of the Q6L e-tron is aerodynamically optimally closed and integrated. For the first time, for the Chinese market, the brand has developed a completely new front design: the Audi designers have incorporated the central element into the broader fascia, both are colored gloss black. This turns the front into an emphatically horizontal sculpture that extends far into the sides, making the SUV appear flatter and oriented towards the road. Large side air inlets emphasize the dynamic appearance, while the flat proportions of the split light unit give the Q6L e-tron a determined expression.

The brand logos with the four rings, illuminated for the first time, are new at the front and rear. A soft projection light visually connects them to the headlights in the grille. The Q6L e-tron is also clearly recognizable as an Audi in its night design.

Innovative lighting technology

With the Q6 e-tron family, Audi is starting a new chapter in electric mobility and lighting technology. With the active digital light signature, the electric SUV is ushering in a new era characterized by unique design and aesthetics found only at Audi.

A software module in one of the five domain computers of the Audi Q6L e-tron makes this form of light signature possible. In the case of the second-generation digital OLED rear lights, the six OLED panels with 360 segments generate a new image every ten milliseconds using a specially developed algorithm.

Thanks to the perfect synthesis of light design and pioneering technology, the light in the new Audi Q6L e-tron appears livelier and more intelligent than ever.

The active digital light signature confirms Audi's status as an industry pioneer in lighting technology.

At the front, the active digital light signature is created by the algorithm interacting with twelve segments that dim up and down. At the rear, all digital OLED segments are used for this purpose. The individual light segments interact in such a way that the overall image of the light signature always remains constant, even in terms of brightness.

Fast charging in the center of a vibrant metropolis: Audi now offers customers in Japan a perfect charging experience with its new charging hub in Tokyo. The Kioichō business district has offices, shopping facilities, and cafés nearby, allowing customers to spend their charging time in various ways. The hub is also adjacent to Audi City Kioichō, the German premium brand's showroom for electric vehicles in the Japanese capital.

With this concept, Audi primarily serves a target group which cannot charge their cars at home in an urban environment. The compact version of the Audi charging hub in Tokyo has two charging stations with a total of four fast-charging points featuring CHAdeMO charging plugs. Like its European counterparts, the fast-charging station can be used for all-electric vehicles, regardless of brand. In the future, Premium Charging Alliance (PCA) members will be able to reserve a charging point via the PCA app and thus avoid waiting times. PCA is a joint project between Audi and Porsche that aims to expand the fast-charging network in Japan. Around 6,000 PCA members currently have access to more than 400 fast-charging points nationwide.

Battery storage solution enables fast charging

Customers can charge their electric vehicles with up to 150 kW at the Audi charging hub in Tokyo. This is an excellent figure because the prerequisites for charging power differ between Japan and European countries. For example, the voltage in the Japanese power grid is only 100 volts. Electrical power is calculated as the product of voltage and current. In Japan, the current must be correspondingly high to achieve high charging capacities. This, in turn, requires large cable cross-sections, which are the exception rather than the rule in the country’s power grids that have evolved historically.

Audi is making fast charging possible at its charging hub in Tokyo through a battery storage solution. Consequently, the company is promoting the expansion of the charging infrastructure while enabling higher charging speeds than the average in Japan. The charging points place low demands on the local power grid. The battery stores electricity when there is little load on the power grid - for example, at night. As the battery acts as a buffer storage for direct current, there is no need for a complex infrastructure with high-voltage supply lines and costly transformers. Audi only uses electricity from renewable sources. Green energy also powers the Audi charging hub, mainly generated directly by the photovoltaic system on the charging station’s roof.